Showing posts with label Guzzi. Show all posts
Showing posts with label Guzzi. Show all posts

Thursday, April 15, 2010

The Guzzi is coming together...

Just a quick update on the Guzzi...

The wallowy suspension really kind of showed itself riding a few hours 2-up the other day. The rear bottomed out a few times, but the forks really need attention. I think the Breva is sprung for a 140lb rider. I'm a tad bit more than that. Even with the front preload maxed, I still end up with the static sag at about 150% of what it should be. So, springs are on their way. I'll limp along with the shock a while longer. Springs are cheap - a full shock kit... not so much. I'll use 20W fork oil when I do the springs to increase damping a little bit. It's a start.

I just drilled and tapped some holes so I can mount the GPS cradle. I have to wire it up once I get a secondary fuse block in and set on a switched circuit. But I like the location I picked for the GPS. It's near the instrument cluster but it doesn't block anything. Pictures later.

Also, I spooned on a new pair of Angel ST tires. Holy CRAP! These things are nice. I have to remember to thank James for the recommendation. I don't know how they'll do on truly hard-core aggressive riding, but in my regular pace on the twisties, I haven't felt so confident, and like the bike is so planted since riding with a nicely warmed-up set of Pilot Powers on my old CBR/F4i. Niiiiiiice.

The factory luggage (used) that I ordered is on the bike and works nicely. I've heard these factory bags are not the best when it comes to being water proof.... I guess time will tell. That'll be disappointing if they're not, but hey... everything can be dealt with. I still have my Nelson-Rigg dry bags if I need them.

I'm going to modify the Givi rack for the top case so I can move the E45 top case back and inch or two to increase pillion room a little bit. The case sits a bit forward of the back edge of the seat and cramps the pillion a little bit. Easy fix. Weld, drill, paint, done.

That's about it for now...

Tuesday, March 2, 2010

Guzzi. Moto Guzzi.

Finally most of the ice and snow is gone from my driveway and street. The main roads have been clear enough to ride for some time, but getting in and out of the neighborhood would have been... interesting. Today, finally, my "new to me" Guzzi enjoys some road time. I let my son take my car today because his is in the shop. So, if I wanted to get to work, I had to ride anyway. Gosh... twisty my arm.

Last night I took a few minutes to get the Guzzi ready for the morning ride in to work, which included moving some things around in the driveway and in the garage. I went to fire the Guzzi up, pushed the starter button and ... click, then nothing. Dead to the world. No power, no lights, no nothing. Great...

Start with the basics... I pulled the battery cover and found a bunch of fuzzy corrosion on the battery terminals. I pulled all that apart and cleaned everything up, including wire-brushing the terminals, cable ends and hardware. I put it all back together, shot some WD-40 in and around the connectors, reinstalled the cover and fired up the bike.

crank, crank, chugga, chugga, vroom, vroom. Music. I will never understand the people who think Harleys sound good... especially when compared to a Guzzi. Harleys always sound like they're about to stall out and are barely hanging on to life at idle. This thing just sounds... intense.

I let the Guzzi just sit there and idle a few minutes while I reprogrammed the clock and got myself familiarized with using the onboard computer, all the while enjoying the mechanical music the Guzzi offers. Finally, when I was all done, I reluctantly shut the bike down, closed up the garage and headed inside for the night.

This morning I opened up the garage, geared up and rolled the bike outside and mounted up. According to the Guzzi's on-board thermometer, the temperature was just about 32 degrees. I was geared up in my Transition II jacket, Mercury pants, Windtex gloves and EXO-400 helmet. Very comfy. It was time to get going. I clunked it into 1st gear, eased out the clutch and was on my way.

This is the second time riding this bike. The first was a couple of hundred miles North on I-95 after picking the bike up in Daytona Beach, Florida. Somewhere in South Carolina I put it on the trailer for the rest of the drive home. So, I'm still learning the bike.

I headed out onto the main roads, nice and gentle, and continued on my way to US Rt. 1. Cold tires, cold asphalt covered with dried salt, the occasional moist areas that may or may not be iced over... yeah, I was riding like a sissy. I'm OK with that... this bike is beautiful and I'm not looking to rash it up any time soon because of silly impatience.

Once out on Rt. 1, I opened it up a little. By then the engine was up to temp, the tires should have been at "normal" operating temps given the conditions, so I played with the throttle a little bit. Yeah. This thing is fun.
Now let's be clear... The Goose won't win any races against truly "fast" machines, but it pulls very nicely and all the way through the rev range. It will get you to extra-legal speeds quickly enough. But who cares...? Spirited as it may be, this bike isn't about speed. Riding this thing takes me right back to the 80s during my muscle car days. The sound and the feel of this bike are very, very reminiscent of the mid-70s Chevies I used to build. A politely-raucous engine in a fairly well refined chassis. This thing is absolutely the small block Chevy of the bike world. And that's a very good thing.

The muscle car comparison continues as you run through the gears and apply varying levels of throttle. The engine is never Caprice-smooth but, rather, is always Chevelle-present. You know it's there, you know it's working and you know it's yawning, just waiting for you to demand more of it. Like its V8 brethren, it's got a fairly low rev limit - I've got the shift like programmed to come on at 7900 RPM - but the 6-speed gear box gives you a cog for every occasion.

When you open up the throttle and the engine winds up - which it does in every gear due to the "all the torque, all the time" nature of the mill - the engine's mechanicals, the intake and exhaust sounds and the general feel of the lump all join together to emit... joy. Just pure, road-loving, wind-feeling, throaty-wail joy.

I can't think of too many cars these days that would give you that same visceral, mechanical, raw feeling of power that a lumpy, cammed-out V8 of yesteryear would offer. So you young guys who've only ever driven buzzy 4-cylinder cars... I can't really help you understand. Sorry.

But this bike offers something more, too. It offers a well-handling chassis, good brakes, neutral and comfortable ergonomics and some kick ass style that - sorry folks - Japanese sport bikes simply don't offer. They make some pretty bikes, to be sure. But rarely are they stylish.
I continued my trip in to work, sticking to the biggest, clearest main roads. Normally I'd be impatient to take the bike down Rt. 82 - Delaware's only twisty road - during my morning commute, but I have to believe there are lots of icy, wet and washed-out places on that road yet. I can wait. Besides, I still haven't dialed in suspension settings and I'm still trusting the air pressure the dealer set when I picked up the bike. No... no, I can wait.

Nice and easy... just a mellow ride to work on a machine that puts character and style one notch higher on the importance scale than flat out, track-style performance. Track-capable bikes are a dime a dozen. How many of them are truly wonderful to ride on regular roads...?

What a nice machine.

Blog Archive